2016 Toro Dingo TX427 Walk Behind Skid Steer WITH TRAILER AND HYD AUGER PACKAGE

2016 Toro Dingo TX427 Walk Behind Skid Steer WITH TRAILER AND HYD AUGER PACKAGE
2016 Toro Dingo TX427 Walk Behind Skid Steer WITH TRAILER AND HYD AUGER PACKAGE
2016 Toro Dingo TX427 Walk Behind Skid Steer WITH TRAILER AND HYD AUGER PACKAGE
2016 Toro Dingo TX427 Walk Behind Skid Steer WITH TRAILER AND HYD AUGER PACKAGE

2016 Toro Dingo TX427 Walk Behind Skid Steer WITH TRAILER AND HYD AUGER PACKAGE
Hydraulic Auger Package included (but not shown). Toro Dingo® compact utility loaders possess the versatility to handle countless jobs on every site: dig, haul, plant and build.

The TX 427 Narrow track design provides a low 5.1 psi ground pressure which is easy on turf. Designed with workers in mind, all of its power is harnessed in only 3 easy to use.

Controls, which make it simple for any worker to step up and be productive immediately! You're up and running in a flash with three easy-to-use controls. 1 The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand. 2 With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3 The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.

Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires. 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it! Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor.

Plus it provides zero radius turn capability for unmatched maneuverability. A 27 hp (20 kw) Kohler® engine provides the necessary power to drive any one of the multitude of Toro attachments available for the Dingo TX.

Engine 25 HP (18.6 kW) Kohler Command Pro Series CH 740. Flow 11.4 gpm (43.2 lpm).

Ground Clearance 4.6 (11.7 cm). Ground Speed 0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h). Height 46.1 (117.1 cm). Hinge Pin Height 65.8 (167.1 cm). Hydraulic System Pressure 3,000 PSI.

Length 92" (233.7 cm) w/bucket; 70.7" (180 cm) w/o bucket. Loader Hydraulic System Joystick control for all funct. Reservoir Capacity 10.5 gallons (40 liters). Tip Capacity 1,530 lbs. Track 96.6" x 5.9" (245 cm x 15 cm).

Weight 1,882 lbs (854 kg). Width 33.7 (85.6 cm). Professionally serviced on a regular basis, ready to work.

Call Jacob with any questions 813-5O6-O762. From earth moving, tilling and trenching to leveling, lifting, hauling and demolishing, all Toro Dingo models can be equipped with over 35 attachments to handle and endless amount of tasks. Make those difficult job site conditions easier to maneuver with this aggressive track option.

Quickly and easily bolted on to any Toro Dingo TX model (except TX 413), this ride-on platform helps minimize operator fatigue - especially in applications requiring a lot of hauling and covering substantial distances. Make night and dark work places, shine. The item "2016 Toro Dingo TX427 Walk Behind Skid Steer WITH TRAILER AND HYD AUGER PACKAGE" is in sale since Monday, November 23, 2020. This item is in the category "Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Backhoe Loaders". The seller is "jj-do-it-products" and is located in Tampa, Florida. This item can be shipped to United States.
2016 Toro Dingo TX427 Walk Behind Skid Steer WITH TRAILER AND HYD AUGER PACKAGE